How do I decide between different tooth counts for the same perimeter?

For an 8mm pitch belt, the tooth count is directly determined by the perimeter: Teeth = Perimeter (mm) ÷ 8. Each variant listing shows the tooth count alongside the perimeter, so you can confirm the match for your pulley system. If your machine specifies a tooth count, multiply by 8mm to find the required perimeter.

20% OFF shipping at yvanlemoine-films.com on orders over $79 + up to 10% OFF products

yvanlemoine-films.com

Ship to:

/ English / USD

New Arrival

Air Freeshipping Best Sellers Nihao Choice

Sourcing

Shipping Calculation

home > 8YU Timing Belt 8mm Pitch 40mm Wide — Rubber Closed Loop CNC Synchronous Drive Belt > 8YU Timing Belt 8mm Pitch 40mm Wide — Rubber Closed Loop CNC Synchronous Drive Belt

8YU Timing Belt 8mm Pitch 40mm Wide — Rubber Closed Loop CNC Synchronous Drive Belt main image 0

8YU Timing Belt 8mm Pitch 40mm Wide — Rubber Closed Loop CNC Synchronous Drive Belt main image 1

download picture

description

Report this seller or product

8YU Timing Belt 8mm Pitch 40mm Wide — Rubber Closed Loop CNC Synchronous Drive Belt8YU Timing Belt 8mm Pitch Reliable Closed Loop Drive for CNC & Automation When a slipping or stretched drive belt throws off your CNC router's positioning or stalls your automation line mid cycle, the cost goes beyond the belt itself. Engineers, machine builders, and serious DIYers who depend on repeatable, slip free motion need a synchronous belt they can trust. This 8YU timing belt delivers consistent power transmission across a wide range of drive

Shopping security

Each payment you make on thelockerguy is secured with strict SSL encryption and PCI DSS data protection protocols

product description

Why choose thelockerguy wholesale?

8YU Timing Belt 8mm Pitch — Reliable Closed-Loop Drive for CNC & Automation

When a slipping or stretched drive belt throws off your CNC router's positioning or stalls your automation line mid-cycle, the cost goes beyond the belt itself. Engineers, machine builders, and serious DIYers who depend on repeatable, slip-free motion need a synchronous belt they can trust. This 8YU timing belt delivers consistent power transmission across a wide range of drive configurations without the backlash or stretch that plagues lower-grade alternatives.

Each belt in this listing is a single closed-loop rubber synchronous belt with an 8mm pitch (YU tooth profile) and a fixed width of 40mm (≈1.57"). Perimeter options range from 520mm (≈20.5") to 2000mm (≈78.7"), with tooth counts from 65 to 250 teeth — each variant's tooth count is listed alongside its perimeter for easy cross-reference. The rubber construction incorporates internal tensile reinforcement, giving the belt dimensional stability under load.

Typical applications include CNC router axis drives where precise linear positioning is critical, 3D printer motion systems requiring low-backlash synchronous drive, and light-to-medium industrial automation equipment such as conveyor indexing and rotary positioning stages. The 8mm pitch makes this belt well-suited to moderate-torque, moderate-speed closed-loop drive systems.

🔗 Compatibility Note: This belt uses the 8YU tooth profile (8mm pitch). Verify that your pulleys or sprockets are manufactured to the 8YU / 8M specification before ordering. Belt width is 40mm — confirm your pulley flange width matches.

✅ Key Features of These 8YU Closed-Loop Synchronous Timing Belts

⚙️8mm Pitch YU Tooth Profile — Engineered for slip-free synchronous power transmission, the 8YU tooth geometry maintains positive engagement with compatible pulleys across varying load conditions.
📏Wide Perimeter Selection (520–2000mm) — With 55 size options covering 520mm (≈20.5") to 2000mm (≈78.7"), you can match the exact belt path length required by your CNC router, 3D printer, or automation drive without custom fabrication.
🔄Closed-Loop Construction — Seamless loop design eliminates the joint weakness found in cut-and-laced belts, providing uniform tension distribution and consistent performance throughout the belt's service life.
🧱Rubber Body with Internal Reinforcement — The rubber compound offers flexibility and grip while internal tensile cords resist elongation under drive loads, helping maintain accurate positioning in CNC synchronous drive applications.
📐40mm Fixed Width for Consistent Torque Capacity — A standardized 40mm (≈1.57") width simplifies pulley selection and delivers repeatable torque handling across all perimeter variants in this listing.
🔢Tooth Count Listed Per Variant — Every size option clearly states the number of teeth alongside the perimeter measurement, making it straightforward to cross-reference against your pulley tooth count and confirm a correct match before purchase.

📐 Technical Specifications — 8YU Rubber Closed-Loop Timing Belt

Belt Type	Closed-Loop Synchronous Timing Belt
Tooth Profile	8YU (8mm pitch, YU profile)
Pitch	8mm (≈0.315")
Belt Width	40mm (≈1.57")
Perimeter Range	520mm (≈20.5") – 2000mm (≈78.7")
Tooth Count Range	65 teeth – 250 teeth
Material	Rubber with internal tensile reinforcement
Construction	Seamless closed loop
Compatible Pulley Standard	8YU / 8M tooth profile pulleys
Quantity per Order	1 piece per variant
Operating Temperature	See variant options / Contact us to confirm
Color / Finish	See variant options

⚠️ Spec Confirmation: If your application has specific temperature, chemical resistance, or load requirements, contact us before ordering to confirm suitability. Tooth count per variant is calculated at 8mm pitch (Teeth = Perimeter ÷ 8mm).

❓ Frequently Asked Questions

How do I choose the right perimeter length for my 8YU timing belt?

Measure the center-to-center distance between your drive and driven pulleys, then calculate the required belt perimeter using the standard formula: Perimeter ≈ 2 × C + π × (D1 + D2) / 2. For example, a 1000mm (≈39.4") perimeter belt is generally suited to mid-range CNC axis spans. Always verify against your machine's actual belt path before ordering. Each variant in this listing shows both the perimeter in mm and the corresponding tooth count.

What load or torque can an 8YU timing belt handle?

The 8YU belt at 40mm width is designed for moderate-to-medium torque synchronous drives. Actual load capacity depends on operating speed, pulley tooth engagement, and tension. This belt is typically used in CNC router axis drives, 3D printer motion systems, and light automation equipment. For high-load industrial applications, contact us to confirm suitability for your specific duty cycle.

Can this timing belt be used outdoors or in humid environments?

The rubber construction generally provides good resistance to moisture and moderate temperature variation. However, prolonged exposure to UV radiation, petroleum-based oils, or extreme temperatures may reduce service life. For outdoor or chemically aggressive environments, contact us to confirm compatibility before installation.

What pulley or sprocket standard is compatible with this belt?

This belt uses the 8YU tooth profile with 8mm pitch, compatible with pulleys manufactured to the 8YU (also referenced as 8M in some regional standards) specification. Always confirm your pulley's tooth profile, pitch, and flange width (40mm) match this belt before installation. Using a mismatched pulley profile will cause premature wear and loss of synchronization.

Is this belt suitable for 3D printers and CNC routers?

Yes. The 8YU closed-loop synchronous belt is commonly used in CNC router axis drives, 3D printer motion systems, and light automation equipment where precise, slip-free power transmission is required. Select the perimeter that matches your machine's belt path length. If you are unsure of the correct size, measure your existing belt's perimeter or count its teeth and multiply by 8mm.

How do I match the tooth count to my pulley?

For an 8mm pitch belt, tooth count is directly determined by perimeter: Teeth = Perimeter (mm) ÷ 8. Each variant in this listing shows the tooth count alongside the perimeter. If your machine specifies a pulley tooth count, multiply by 8mm to find the required belt perimeter. The belt tooth count does not need to match the pulley tooth count — it is the pitch and profile that must match.

What is the belt width and does it affect compatibility?

All variants in this listing are 40mm (≈1.57") wide. Belt width affects torque capacity and must be accommodated by your pulley's flange width. If your application requires a narrower or wider belt, contact us — other widths may be available. Do not use a belt wider than your pulley flanges, as this will cause the belt to track incorrectly and wear prematurely.

🛒 Select your type and perimeter above, then add to cart — ships from our US warehouse.

8YU Timing Belt 8mm Pitch 40mm Wide — Rubber Closed Loop CNC Synchronous Drive Belt

Name: 8YU Timing Belt 8mm Pitch 40mm Wide — Rubber Closed Loop CNC Synchronous Drive Belt
Brand: yvanlemoine-films.com
SKU: 35380631079
Price: 27.95 USD
Availability: InStock
Rating: 4.5895 (1977 reviews)