The Legacy Safety & Security PASGT Ballistic Helmet is a multi-layer combat helmet built on the standard PASGT profile (MIL-H-44099A) and constructed from a combination of aramid and ballistic polyethylene. Tested for penetration and back-face deformation, the helmet defeated 7.62×51 M80 NATO, 7.62×39, 5.56×45, and .223 rounds in documented testing. It weighs 5.3 lbs and ships in Small, Medium, Large, and XL, available in Black, Coyote, and OD Green.

Who this is for

• Law enforcement officers: who need a field-deployable ballistic helmet on a PASGT platform compatible with existing accessories and face-guard attachments.
• Military and ground troops: operating in threat environments where head protection against ballistic and fragmentation hazards is a mission requirement.
• Special units and security professionals: who require a durable, multi-threat helmet in a proven, widely-issued PASGT silhouette.

Threat rating and standard

The helmet was tested for penetration and back-face deformation and defeated 7.62×51 M80 NATO, 7.62×39, 5.56×45, and .223 rounds. The product features list NIJ 0101.06 Level III as the applicable standard; however, NIJ 0101.06 is a body armor plate standard, and ballistic helmets are formally evaluated under NIJ 0106.01 (fragmentation) and NIJ 0123.00 (ballistic). No wearable helmet currently achieves a NIJ Compliant Products List rifle-threat listing under any published helmet standard. Buyers with mission-critical certification requirements should confirm compliance documentation directly with us before purchasing.

The shell provides protection against ballistic hazards and fragmentation. The vendor cites standard PASGT design compliance with MIL-H-44099A.

Shell material and construction

The helmet uses a multi-layer construction combining aramid fiber and ballistic polyethylene. This hybrid layering is designed to distribute and absorb ballistic and fragmentation energy across the shell. The PASGT profile — the same geometry issued across U.S. military branches for decades — provides extended coverage of the temples, ears, and the rear of the skull relative to more modern cut profiles such as FAST or MICH.

Suspension and retention

The head harness includes a foam-cushioned leather headband and a chinstrap. The chinstrap base includes an attachment point for an optional face guard, which allows modular configuration for operators who require additional facial protection. The system is designed for extended wear comfort while keeping the helmet secure during dynamic movement.

Sizing

The helmet is available in four sizes: Small, Medium, Large, and XL. Select the size that corresponds to your head circumference measurement for a proper fit. Contact us if you need guidance on sizing before ordering.

Specifications

Frequently asked questions

Can this helmet be shipped to my state?

Yes, with one important exception: body armor cannot be shipped to residents of New York or Connecticut under state law. It is also subject to U.S. export regulations. Under 18 U.S.C. § 931, anyone with a federal felony conviction for a crime of violence is prohibited from purchasing or possessing body armor.

What does "Level III" mean for a helmet, and is this different from a Level III plate?

NIJ 0101.06 Level III is a certification standard written for body armor plates, not helmets. Helmets are evaluated under NIJ 0106.01 (fragmentation protection) and NIJ 0123.00 (ballistic). This helmet was tested against Level III rifle threats and defeated those rounds in documented testing, but it does not carry a listing on the NIJ Compliant Products List under a helmet standard. Contact us before purchasing if formal NIJ listing documentation is required for your application.

Will this helmet stop rifle rounds?

In documented testing, the helmet defeated 7.62×51 M80 NATO, 7.62×39, 5.56×45, and .223 rounds for penetration and back-face deformation. The specific velocities and test conditions for those results are not published. No wearable helmet is currently NIJ-listed at rifle-threat levels under the published helmet ballistic standard (NIJ 0123.00 RF1 or above).

How heavy is this helmet, and is the weight manageable for extended wear?

The helmet weighs 5.3 lbs. For reference, a standard PASGT helmet in ballistic nylon weighed approximately 3.5–4.5 lbs; the added weight here reflects the multi-layer aramid/polyethylene ballistic construction. Extended wear at this weight will depend on the user's physical conditioning and mission profile. The foam-cushioned leather harness is designed to distribute load and improve comfort.

What size do I need?

The helmet ships in Small, Medium, Large, and XL. Measure the circumference of your head approximately one inch above your eyebrows to determine your size. Contact us if you need help matching your measurement to the correct size before ordering.

Does this helmet accept a face guard or NVG mount?

The chinstrap base includes an attachment point for an optional face guard. The vendor page does not specify an NVG shroud, ARC rails, or other accessory rail system on this model. Contact us for accessory compatibility details before ordering.