V2 SMART LED RING KITS ONLY, NOT THE DOOR PODS. EL KIT DE ANILLOS DE LUZ NADAMAS !

THIS KIT IS REQUIRED IF INSTALLING IN DOORS !

YOU WILL GET 1 MODULE PER DOOR

JUST LIKE THE HEADLINER SMART KITS, BUT NOW THEY ARE HERE FOR DOORS !

THESE RINGS ARE INFUSED WITH THE SMARTEST LED STRIPS KNOWN TO MAN KIND. CHOOSE FROM THE 100+ EFFECTS IN THE APP (BANLANX IN APP STORE) AND ALSO SOLID COLOR OPTIONS.

What do I get in my package ?

Every kit will come with the SMART RINGS, 2+ MODULES (DEPENDING ON THE KIT YOU PURCHASE), AND 8FT OF POWER WIRE PER DOOR.

How do I install them ? Is it easy to install ?

You will start off by running the included power wire though the door grommet/boot into the inside of the doors. The power wire included will be used to insert into the module included, you will do this to all 2 doors or 4 doors depending on the kit you buy. You will have to remove your speaker since these rings are designed to go behind the speaker, so you will have to disconnect the cables from the speaker as well. Now grab your SMART RINGS and connect the ring that has the shortest male end into the module, now your left with a female end on the 1st ring. The second ring will then connect to the female connector of the 1st ring. Now mount your speakers back into place and secure the module inside the door if possible. 

On the other end of the power wire, you might need to extend this wiring to your nearest 12v source. This can be a battery that you might have inside your cab or you can run the wires into the power section of the amplifier.

(NOT THE SPEAKER OUTPUT SECTION).

The install difficulty is about a 7/10 just because some vehicles have a small door boot so it can be difficult to insert the power cable through the boot but other than that, the connecting of the rings to the module is easy.

Will they fit my speakers ?

I've designed these rings to fit many 6.5" in the market. Also make sure that your speakers are spaced out and not touching each other because the SMART RINGS are bigger than the speakers so you will need about 1/4" to 1/2" of spacing between each speaker.