Most shishas ask you to smoke them one way. The Moze Breeze Two asks how you'd like to set it up first. Its patented variable blow-out system lets you choose where the smoke clears — from the base, below the coal plate, or up above the bowl — so the pipe is configured to your session before you ever pack it. Standing around 40 cm without the bowl and wrapped in a deep Wavy Blue resin sleeve, it is one of the more genuinely considered builds we keep on the shelf.

Variable Blow-Out System · Single Hose Setup · Melbourne Stocked

Moze Breeze Two Wavy Blue Shisha — Patented Variable Purge, ~40cm

Why This Shisha

• Patented variable blow-out is the headline: configure the purge in multiple modes — classic from the base, below the coal plate, or top-purge above the bowl — and build the draw your way before you smoke.
• Two coal plates in the box (one standard, one for the top-purge mode) and a 16 cm coal-plate diameter give you a stable, generous platform for managing heat.
• Stainless steel core, POM base and epoxy/acrylic resin sleeve make for a solid, well-damped build — substantial in the hand without being unwieldy at roughly 40 cm tall.
• Interchangeable Wavy Blue sleeve in poured acrylic/epoxy resin: a deep, fluid wave pattern that can be swapped out later if you want to change the look of the pipe.
• Two-piece stainless steel mouthpiece included from the factory, with a colour-matched resin sleeve — no separate mouthpiece purchase to think about.

Fit & Compatibility

• Single-hose shisha — one hose connection. A hose is not included; a silicone hose is the natural pairing.
• Takes a standard clay or phunnel bowl via the included bowl adapter. A bowl is not included and is needed to smoke.
• Factory two-piece stainless steel mouthpiece included, so the pipe arrives ready to draw once you add a bowl and hose.

Care & Maintenance

• Rinse the glass vessel and stainless steel parts with warm water after each session; dry the metalwork to keep it bright.
• Wipe the resin sleeve with a soft, damp cloth — avoid abrasive pads or harsh solvents that can dull the finish.
• Let all components dry fully before reassembly and storage to keep seals fresh.
• Store the pipe upright and the silicone seals loose rather than compressed, so they keep their shape.

In the Box

• 1 × Glass vessel / base
• 1 × Stainless steel diffuser + dip tube
• 1 × POM base
• 1 × Stainless steel core
• 1 × Wavy Blue acrylic/epoxy resin sleeve
• 1 × Stainless steel blow-out element
• 2 × Stainless steel coal plates (one standard, one for top-purge)
• 1 × Bowl adapter
• 1 × Two-piece stainless steel mouthpiece + resin sleeve
• Silicone seals (two sizes) + bowl seal
• 1 × Tray

Please note: No hose and no clay/phunnel bowl are included — both are needed to smoke and are easy add-ons.

FAQ

What exactly does the variable blow-out system do?

It lets you choose where the smoke clears when you purge — from the base, below the coal plate, or above the bowl. You set the configuration as you assemble the pipe, so the draw is built to your preference before the first bowl.

Can I change the look of the pipe later?

Yes. The Wavy Blue finish is an interchangeable acrylic/epoxy resin sleeve, so the look can be swapped down the track without replacing the whole pipe.

Does it come with a hose and bowl?

The factory mouthpiece is included, but a hose and a clay or phunnel bowl are not — both are needed to smoke. The pipe takes a standard bowl via the included adapter.

Are the small air bubbles in the resin a fault?

No. The glass and resin parts are individually made, so minor air inclusions or slight variation between pieces are normal characteristics of a handcrafted finish, not defects.