• Customizable width and height for the perfect fit in any wall
  
• Perfect for fill a pre-existing pet door rough cutout 
• Sturdy aluminum framing in 4 color options to match your home decor
• Single or double flap options for tailored insulation needs
• Easy-to-trim aluminum tunnel for walls 2"-10" thick or 2"-16" for thicker walls
• Clear, flexible vinyl flaps allow easy pet access and come with a matching locking cover
• We'll need more information to complete your order.  In your Order Confirmation email there is an Orange button with "Finish Your Order".  Click on it to enter to answer questions to finish your order. Thank you!

The Hale Custom Dimension Dog Doors for Walls provide the ideal solution for pet owners in need of a perfectly fitting, energy-efficient pet door for their home. With customizable width and height options, you can ensure the pet door fits seamlessly into your wall space, whether you're replacing an existing dog door or installing one in a limited area.

Constructed with a durable aluminum frame, this pet door is built to last and comes in four stylish color options: White, Arizona Beige, Bronze, or Brushed Aluminum. To cater to your insulation needs, you can choose between a single flap for temperate climates or a double flap for more severe weather conditions. The flexible vinyl flaps are easy for pets to use, featuring magnets and weather stripping that provide a secure seal and prevent drafts.

Installation is a breeze, even for those who consider themselves handy around the house.

The included aluminum tunnel is simple to trim, allowing for installation in walls ranging from 2" to 10" thick, with a 2" to 16" option available for thicker walls. This pet door also comes with a matching, top-loading locking cover that adds an extra layer of security when not in use.

The Hale Pet Door is great for withstanding extreme weather, including direct blizzard winds without allowing cold air or snow inside. 

Looking for something else? Check out our full selection of through wall dog doors or Hale pet products.

Features:

• Flexible vinyl flaps are available in a single or double flap option:
• Single: temperate/moderate climates.
• Dual Flap: severe climates.
• Ideal for replacing existing dog doors or installing in limited wall areas
• Includes magnets for secure closure and weather stripping for energy efficiency
• Aluminum frame available in White, Arizona Beige, Bronze, or Brushed Aluminum. Custom option of mixing and matching the interior frame color is available for an additional cost.
• Customizable aluminum tunnel to fit various wall thicknesses
• Includes a top-loading, color-coordinated locking cover for added security.  Customize the door by adding a side-loading locking cover if the default top-loading cover doesn't work for you.
• An optional rain cap that hooks to the top edge of the outside frame and helps protect against water intrusion can be added to your door by purchasing one a checkout with your Hale Pet Door (if choosing secondary exterior security cover and rain cap, you must choose a side loading security cover)

Ordering Instructions:

• Remember that the width you specify is the rough cut and not the flap dimension. The flap size will be 2 1/16" narrower and 1 3/8" shorter than the rough cut out.  Make sure there is enough room left for your pet. We want to ensure that your pet will feel comfortable using the pet door, so we recommend measuring your pet prior to ordering.  

• If you need to fill an existing hole/replace a wall pet door, measure the height and width in 3 locations: near the top, middle, and bottom. Choose the narrowest of both height and width for your dimensions. Do not add an extra width or height when specifying the dimensions.  Please note:  Maximum Rough Cutout in one direction cannot exceed 23 3/8".

• Once you have the height and width measurements, multiply them together to get the total square inches. For example, if you have measured 10" x 12", the result is 120 inches. Using this number, select the square inch range in the drop-down menu. Please note that the square inch ranges are only used for pricing purposes. The pet door is built to your exact dimensions and is not adjustable. Make sure that the height and width dimensions, when multiplied, result in a number of square inches within the range that you specified in the drop-down menu.
• Choose whether you would like a single or double flap.
• Choose between White, Arizona Beige, Bronze, or Brushed Aluminum for your frame color.
• On your order confirmation email you will see an Orange "Finish Your Order"  button.  Click on it to provide your rough cut out measurements.  Please note that the minimum rough-cut dimension is 7" x 7".
• The locking cover slides down from the top of the pet door and secures with a steel deadbolt. If there is an obstruction that would prevent the cover from functioning properly when loading from the top, you can add a side-load option.
• If your wall thickness exceeds 10", you'll need the 16" tunnel option. This option adds 10% to the cost of the pet door. Note that there is no accommodation for walls thicker than 16".  Please contact Customer Service to order the thicker tunnel.