Lock pavers into place with FlexLock G2 Intelligent Polymeric Sand — a contractor-grade jointing sand from Alliance Designer Products that bonds on contact with water and holds for up to 15 years. Sweep into joints on patios, walkways, driveways, and pool decks for a finish that resists rain runoff, weed growth, and insect burrowing.

Why Pros Specify FlexLock G2

• Rapid Set Technology — ready for light foot traffic in about 15 minutes, full cure in 24 hours
• Haze-free activation: no dusty white film left on paver surfaces after rinse
• One watering, no blower needed — activates with a single saturating rinse
• Flexes with freeze-thaw cycles without cracking out of joints
• Rated for both residential and commercial installations, including streetscapes and steep slopes

Applications

• Concrete and clay paver patios, walkways, and driveways
• Natural stone, flagstone, and footpath installations
• Pool decks, splash pads, and parking spaces
• Joint widths from 1/8 in (3 mm) to 2 in (5 cm); minimum joint depth 1-1/2 in

Specifications

• Product: FlexLock G2 Intelligent Polymeric Sand
• Manufacturer: Alliance Designer Products Inc. (Laval, Québec, Canada)
• Size: 50 lb bag
• Colors available: Slate Grey, Sandy Beige
• Approximate coverage: roughly 65–85 sq ft per bag on 2-3/8 in pavers with 1/8–3/8 in joints (varies with joint width, depth, and paver thickness — see manufacturer’s sand calculator)
• Service life: up to 15 years

Installation

• Sweep dry sand into clean, dry joints with a hard broom in multiple directions until filled flush
• Compact with a plate compactor fitted with a rubber pad to settle the sand
• Sweep off all residue, then water each 30 sq ft section for about 30 seconds until water pools
• Do not apply in rain or on wet pavers

Stop by Garoppo’s to pick up a bag, or schedule local delivery within our service area.