Tube Cleaning Wand with Cleaning Pads

The CPAP tube cleaning wand by AG Industries is quick, easy, convenient and effective. The tube cleaning wand comes in 3 sections that easily snap together along with 7 pre-moistened cleaning pads, making it the ideal solution for keeping your CPAP and BiPAP hoses and tubing clean and free from bacteria.

The tube cleaning wand is approximately 40 inches long. The pre-moistened cleaning pads are designed to effectively and efficiently clean the inside of all standard CPAP/BiPAP tubing.

The Pre-Moistened Cleaning Pads are moistened with a non-alcohol, latex free, unscented solution that is safe for use in this application. It is over 99% natural, they should always be stored in their original container to ensure they are kept moist for use.

Important Tip: Using a dry pad to clean your tubing may reduce cleaning effectiveness and cause problems with the pad or wand getting stuck. Each cleaning pad should be used once and then discarded.

Instructions on Use

• Snap the 3 wand sections together
• Insert a pre-moistened pad over the tapered end of the wand
• Disconnect your CPAP or BiPAP Hose from your mask and machine
• Insert the wand into one end of the tube, slide the wand back and forth in short motions down the length of the tube
• Repeat cleaning from each end of the CPAP and BiPAP Tube
• Remove and dispose of the cleaning pad
• Wand sections easily disassemble and pack away for storage or travel

Compatibility: The Tube Cleaning Wand is designed for use with 22mm standard or Premium CPAP - BiPAP tubing. It is also compatible with Hybernite Tubing and Fisher Paykel's ThermoSmart Tubing. The Tube Cleaning Wand is NOT Compatible with slim 15mm tubing or heated tubing from ResMed and Respironics (such as ClimateLine tubing, SlimLine tubing, PR SystemOne heated tubing, and Slim Premium tubing).

Included with this Purchase

• (1) Tube Cleaning Wand with 7 Cleaning Pads