Product Description

Overview

The Triconex 4351B Communication Module (TCM) is a dedicated interface for Tricon™ v10.0 and later TMR systems, serving as the primary link between the safety controller and external networks. It delivers high-speed, secure data exchange with Distributed Control Systems (DCS), Human-Machine Interfaces (HMI), and other controllers while maintaining the system’s safety integrity.

Key Features

Multi-Protocol Communication
The 4351B supports multiple industry-standard protocols simultaneously, including:

• TriStation: Programming and diagnostic access via TriStation 1131 software

• Modbus TCP/IP and Serial: Integration with DCS or PLC systems as Master or Slave

• TSAA with IP Multicast: High-speed data acquisition

• Peer-to-Peer (UDP/IP): Safety and non-safety data exchange between controllers

• SNTP, ICMP, Trimble GPS, Embedded OPC Server (Models 4353/4354)

Extensive Connectivity

• Ethernet Ports: 2x 10/100 Mbps copper RJ-45 ports, supporting high-speed networking

• Serial Ports: 4x RS-232/RS-485, up to 115.2 Kbps per port

• Fiber Ethernet: 100 Mbps for long-distance or isolated connections

• Debug Port: Dedicated interface for diagnostics and maintenance

System Protection and Reliability

• Port Isolation: 500 VDC galvanic separation safeguards internal logic from electrical interference

• TMR Integration: Fully compatible with triple-redundant processor modules

• Deterministic Communication: Cycle timing aligns with Tricon scan to prevent data jitter

Maintenance and Operation

• Hot-Swappable: Can be replaced without process interruption

• Status Indicators: PASS, FAULT, ACTIVE, FIRM, and per-port Link/TX/RX LEDs for real-time monitoring

Technical Specifications

Applications

• Integration of Tricon SIS with plant-wide DCS (Honeywell, Yokogawa, Emerson)

• SCADA connectivity for real-time alarms, events, and diagnostics

• Peer-to-peer safety data sharing between Tricon or Trident controllers

• High-resolution Sequence of Events (SOE) export for post-event analysis

FAQ

Q: Can the 4351B be replaced while the system is running?
A: Yes, it supports hot-swap replacement without interrupting the controller or safety logic.

Q: What protocols are supported by this module?
A: TriStation, Modbus (TCP/IP and Serial), TSAA (IP Multicast), Peer-to-Peer UDP/IP, SNTP, ICMP, Trimble GPS, and Embedded OPC Server (4353/4354 models).

Q: Is the 4351B suitable for SIL 3 systems?
A: Yes, it is designed for SIL 3 safety environments and fully integrates with TMR controllers.